 |
|||||||||||||||||||||||
Wood Floors
|
|||||||||||||||||||||||
|
CARING FOR YOUR HARDWOODS Yes, everyone loves a rich, beautiful hardwood floor. Hardwoods truly can last forever if they are properly maintained. Other great news is that hardwood floors, when properly maintained, are the easiest of all floor surfaces to keep clean and new looking. If floors and furnishings are neglected, the finish can wear through causing loss of stain color and damage to the actual wood. This will require extensive restoration including complete sanding, staining and refinishing. This process is expensive, time consuming and inconvenient. It even may require you to move out of your home during the process. Most wood floors can only accept two or three of the treatments described above over a lifetime. The wood veneer can be sanded away and the floors will need to be replaced. It pays to maintain your floors. JNR Cleaning Service uses a system that is completely DUST-FREE. You will not be cleaning up our dust months later as is the case with the sanding process. The system is ODORLESS, NON-TOXIC and DRIES IN ABOUT AN HOUR. You can walk in your stockings at that time. Furniture may be moved back in 4 hours and rugs after 12 hours. Don’t allow shoes on the floor for the first 24 hours. After that, your new finish is hardened and ready for normal use. Does your floor need to be refinished? An easy way to tell is if cleaning no longer restores your floors to an acceptable appearance. Besides the dull appearance, look for scratches, gouges and separations between the boards. Maintenance treatments every |
|||||||||||||||||||||||
|
THE PROCESS 1. Visual inspection. We will join you in the inspection to be sure we have found all the damaged areas. Another purpose for the inspection is to determine if we can restore the appearance with our system or if a more aggressive restoration will be required, including sanding, staining and refinishing. 2. Complete cleaning and abrasion. This step will remove all loose and embedded soil. It will take off scuffmarks and through mild abrasion remove the surface layer of the old finish. This leaves your floor in ideal condition for the new finish to be applied. The entire process is dust free. 3. Initial sealer coat of finish which is odorless and non-toxic. 4. Final finish coat. You have your choice of Semi-gloss or Matte (satin) finish. BEFORE and AFTER |
|||||||||||||||||||||||
